#TWO AUDIO SOURCES TO ONE OUTPUT HOW TO#
#TWO AUDIO SOURCES TO ONE OUTPUT INSTALL#
#TWO AUDIO SOURCES TO ONE OUTPUT DRIVER#
#TWO AUDIO SOURCES TO ONE OUTPUT ARCHIVE#
#TWO AUDIO SOURCES TO ONE OUTPUT SOFTWARE#

Once TRAKTOR has been restarted, the selected inputs and outputs of both audio interfaces are now available in TRAKTOR`s Input Routing and Output Routing Preferences.

CloseВ the ASIO4ALL panel and restart TRAKTOR.

Also make sure the respective audio interface is globally activated.

Enable the inputs and outputs you want to use by clicking the 'power' buttons in front of each entry.

We recommend to not disable any inputs and outputs if your audio interface is affected. Note: Disabling inputs or outputs which already have been active may cause crashes with certain audio interfaces.

Now all individual inputs and outputs are visible. Expand the entries of the audio devices you want to use by clicking the small + symbols.Read this article to learn more about latency. Click on the wrench icon to open the advanced settings where you can adjust the latency.

#TWO AUDIO SOURCES TO ONE OUTPUT SOFTWARE#

Use software to mix your two input sources: record one, record the second one, mix with something like cool edit. No possible way to have both input devices active at the same time then. If a connected device is not showing up, click on the diamond icon. Buy a stereo switchbox at radio shack for 15.

The ASIO4ALL control panel will list all audio devices currently connected to your system.

#TWO AUDIO SOURCES TO ONE OUTPUT DRIVER#

Once the driver has been selected, the ASIO4ALL icon will appear on the Desktop's toobar.Open TRAKTOR and select the ASIO4ALL (ASIO) driver under Audio Device in Preferences > Audio Setup.

#TWO AUDIO SOURCES TO ONE OUTPUT INSTALL#

Download and install the latest ASIO4ALL driver from.

After selecting the newly created Aggregate Device driver as your Audio Device in TRAKTOR`s Audio Setup, all the inputs and outputs of the included audio interfaces are now available in TRAKTOR`s Input Routing and Output Routing.

You can now close the Audio-Midi-Setup and open TRAKTOR.

Mark the checkboxes for the audio interfaces you want to make available in TRAKTOR in the Use column.

Add a new Aggregate Device by hitting the + button under the audio device list.

Make sure that the Audio Devices window is visible (From the toolbar select Window > Show Audio Devices (OS X 10.9 or lower: Show Audio Window).

Open the Audio-Midi-Setup from Applications > Utilities.

Please note that a reliable performance when using this workaround is not guaranteed. Nevertheless, there is a workaround that will allow you to use the inputs and / or outputs of two different audio interfaces within TRAKTOR. Therefore, we recommend using a singleВ audio interface which offers all theВ inputs andВ outputs you need for playback, monitoring and recording. This wayВ various issues concerning the stability and performance can be avoided. Or you can do it my way which is to simply try it.Like most professional audio applications, TRAKTOR does not allow to select and use two or more audio interfacesВ at once. Obviously you need to consult the specs of the devices in question to verify this. Since most modern equipment has input impedances in the mega-ohms, and output impedances in the kilo-ohms you can usually drive several devices from one output.

#TWO AUDIO SOURCES TO ONE OUTPUT HOW TO#

Getting into how to calculate all of this is, unfortunately, beyond the scope of inSync, but the information is readily available in many audio and electronics books. A general rule of thumb is that if the net input impedance of all of the devices does not fall below two or three times the output impedance of the outputting device then things should work reasonably well. Other places people commonly run into this issue is making cassette dubs across multiple machines all being driven by one machine, and setting up PA systems where one output of an electronic crossover must drive several amplifiers at once.ДЇor those who want a little more background, the issue really boils down to the match between the input and output impedances (see WFTD вЂњ impedanceвЂњ) of the devices.

#TWO AUDIO SOURCES TO ONE OUTPUT ARCHIVE#

If you are an audio purest then you will be best served by buying a high quality DA (see WFTD archive вЂњ Distribution AmpвЂќ ) because there always is some minute amount of loss in these situations.

The quick answer is that as long as all of the gear involved is relatively current you should have no significant problems. My dilemma is that I have stereo outs from my mixer that I want to send to two separate stereo amps. asks, вЂњI was wondering how much integrity an audio signal loses when split via a Y-connector. Marching Percussion Accessories Shop By Category Guitar Workshop Keyboards & Synthesizers Shop By CategoryД¬ase Finder Drums & Percussion Shop By CategoryД¬able Finder Microphones Shop By CategoryД¬ase Finder DJ Equipment Shop By CategoryД¬able Finder Band & Orchestra Shop By Category Case Finder Live Sound & Lighting Shop By CategoryД¬ase Finder Software & Plug-ins Shop By Category

Two audio sources to one output